PANEL | Bathroom panels | Acquabella

Panels

PANEL

Our panels were created with fantasy and imagination as coating for the replacement of the bathtub with the shower tray . Our architects and designers develop their own designs, projecting coated seats, walls with different retro illuminated volumes, etc.

We are in front of a versatile and easy to handle product, which has been tested and passed the highest standards of quality.

Features

Minimum format

1000x600 mm*
*Quiz texture only available in 2500x1200 mm

Maximum format

2500x1200 mm (XL)*
*Nude y Ardesia textures max. 2400x1200 mm

Height

THICKNESS: 6 mm

Naturally made colors

Naturally made colors

Naturally made colors

Naturally made colors

Naturally made colors

Naturally made colors

Naturally made colors

Naturally made colors

RAL/NCS Colors

* The colours shown in the images on the website are approximate. The appearance of the material may vary slightly from that shown in the photographs.

Downloads PANEL

FAQs

  • What products may I use to clean the trays and AKRON Acquabella panels after the installation ?
    To clean any traces of glue and cement mortar use a descaler called Fugasoap (KERAKOLL), DETERTEK from FILA brand, because it is specific for the removal of debris from construction works, also used for the removal of other components such as salt, rust an limescale, please read the instructions. DO NOT RUB, let the product act; NEVER USE PADS (SCOTCH BRITE, or NATURAL FIBER) nor SOLVENTS, ACID, ALKALI OR ABRASIVE. After cleaning, rinse thoroughly and ensure sufficient ventilation of the bathroom. It is not dangerous for the user an not dangerous for the environment. For more information, you can check our Youtube channel Acquabella Bath.
  • What products may I use to clean my Acquabella wall panels daily ?
    Soap and water applied with a non-abrasive sponge. NEVER USE PADS (SCOTCH BRITE, or NATURAL FIBER) nor SOLVENTS, ACID, ALKALI OR ABRASIVE.
  • What material may I use for gluing or sealing Acquabella AKRON panels ?
    The gluing of the various elements must be done using SIKAFLEX (SIKA), SUPERFLEX (KERAKOLL) or ULTRABOND MS RAPID (Mapei) and sealing with ceramic grouting material or non acidic silicone.
  • What have thick that can accompany Acquabella AKRON of panels ?
    Wall panels have a thickness of 6mm
  • Is there a solution if the surface of my AKRON Acquabella panels is damaged ?
    Even we take the utmost care to protect the shower tray during the installation, it is possible that for various reasons the shower tray surface could be damaged. For these cases we have a REPAIR KIT with the same colour and easy application.
preguntas frecuentes

Contact

    Message

    terms and conditions.